Route a Group To An Aux Channel Using The Gainer Module

Send Effects can route their output to Aux Channels instead of back into the Instrument. But with the Gainer Module, you can send the signal from the Group directly to an Aux Channel. In today’s video tutorial I’ll show you to Route a Group To An Aux Channel Using The Gainer Module.

Send Effects can route their output to Aux Channels instead of back into the Instrument. No news here. But with the Gainer Module, you can send signal from the Group directly to an Aux Channel and optionally out to hardware effects or into your DAW.

Let’s take a look on how you can route a group to an aux channel using the gainer module, routing the aux channel to your DAW, in this case Logic Pro X and then inserting one my my favorite reverb’s, ValhallaRoom. First select the Group you want to route to the aux channel by selecting it in the Group Editor, the Group selector or in the Monitor>Groups tab.

Remember to leave a comment to let us know what you think about the video, how you plan on using the techniques you have learned or if want to give us some feedback!