Patchblocks for Eurorack announced!

Patchblocks for Eurorack module from Maker.IE is announced and available for pre-order.

Patchblocks allows the user to program and customise how their mini synth behaves; it can be an audio oscillator, sequencer, drum machine, effects unit – the limit is your imagination.

PATCHBLOCKS FOR EURORACK – TECHNICAL SPECIFICATIONS

Module Size – 8HP, depth 30mm (skiff friendly)
The module requires 50mA of +12v, 25mA of -12v and 30mA of +5v to operate, and is normally powered from a Eurorack power supply distribution bus.
Audio I/O – Left and Right channel analogue audio inputs and outputs, voltage range -10V to +10V.
Gate / Trigger Inputs – for the Left and Right switches, voltage range 0-+5V, overvoltage protected.
Control Voltage Inputs – for the Left and Right knobs/pots, voltage range -2.5V to +2.5V. When a CV signal is present the knob/pot acts as an attenuator/level control, when no CV signal is present the knob performs the function assigned in the Patch.
Digital Audio and mid/serial data I/O – Using a 5pin IDC connector and ribbon cable connected on the back of the module, Left and Right channel digital audio and midi data (TX/RX) can be sent between modules, or to/from a desktop Patchblocks device.
USB – USB type B connector accessible at the front of the module, ESD and overvoltage protected.

More informations :

Patchblocks